PV Powered PVP4800 Información técnica descargar pdf (Pagina 21)

PV Grid-tied Residential Inverter and Integrated AC/DC Disconnect

Installation and Operation Manual

Inside Screw

Figure 3-3 Inverter’s Inside Screw Below the Power Board

Securing the Integrated AC/DC Disconnect

When the inverter’s screws are completely installed, the Integrated AC/DC

Disconnect also needs to be secured to the wall.

1. Make sure the AC/DC ON/OFF switch is in the OFF position.

2. Remove the screws around the edge of the disconnect’s front cover and

remove the lid.

3. Secure the disconnect to the wall at the two internal locations using

a rubber washer with a #13 zinc or stainless steel screw. The rubber

washer seals the hole. The screws must secure to a single stud for

rigidity. Refer to the wall mount template for specic locations.

If at any time the inverter is removed for service, the Integrated AC/DC

Disconnect remains in place.

Inverter

Mounting Bracket

GFI fuse external

access port

Integrated AC/DC

Disconnect

Figure 3-4 Inverter and Integrated AC/DC

Disconnect with Mounting Bracket

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 83 84

Sin comentarios

PV Powered PVP4800 Información técnica Pagina 21