
67
PVP250kW & PVP260kW Inverter
Installation & Operation Manual
6.3 Display Screens and Display Operation
Display Screens
The inverter display provides the operator with information about the current state of
the inverter. There are ve sets of screens that may display depending on the state of the
inverter. The ve states are: Startup, Power Track (normal power production state), Fault,
Warning and Disabled. Each of the display screens for each state are shown in Figures
6-4 through 6-8. If there is a series of display screens associated with the inverter state
then the inverter will continuously scroll through these screens.
If a fault occurs, the display also provides a fault code that corresponds to a set of pre-
dened fault descriptions as detailed in
Appendix D - Limits, Fault Codes, Torque
Values, and Wire Sizes
.
Figure 6-3 Display
Figure 6-4 Startup State Screen
Screen 1: Product Screen 2: State Screen 3: DC Values
Screen 4: AC Values Screen 5: Power Values
Figure 6-5 Power Track State Screens
ON/OFF Switch
Pause/Scroll Button
Comentarios a estos manuales