PV Powered 3000 Manual de instalación descargar pdf (Pagina 49)

SMA Solar Technology AG Opening and Closing

Installation Manual SB25_30-IA-IEN115050 49

7. If an Electronic Solar Switch is installed, check the

Electronic Solar Switch for wear, as described in

Section 8.2 "Checking the Electronic Solar Switch

for Wear" (page50), and reattach it firmly.

8. Switch on the miniature circuit-breaker.

9. Check whether the display and the LEDs indicate a

normal operating state

(see Section 6 "Commissioning" (page38)).

☑ The inverter is closed and in operation.

NOTICE!

Manipulating the connector in the handle can damage the Electronic Solar

Switch.

The connector within the handle must remain movable in order to ensure proper contact.

Tightening the screw voids all warranty claims and creates a fire risk.

•Do not tighten the connector screw in the Electronic Solar Switch handle.

NOTICE!

The Electronic Solar Switch can be damaged if it is not plugged in correctly.

If it is not correctly connected, the Electronic Solar Switch can be damaged by high

voltages.

• Plug the handle firmly onto the jack of the Electronic Solar Switch.

• Check that the handle is securely in place.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Sin comentarios

PV Powered 3000 Manual de instalación Pagina 49