PV Powered 3000 Manual de instalación Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 76
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
Opening and Closing SMA Solar Technology AG
48 SB25_30-IA-IEN115050 Installation Manual
7.3 Closing the Inverter
1. Establish the protective conductor (PE) connection to the enclosure lid.
2. Attach the enclosure lid of the inverter by evenly
tightening the four lid screws.
3. Check the DC connectors for correct polarity and connect them.
To unlock the DC connectors, see Section 7.2 "Opening the Inverter" (page45).
4. Close all the DC inputs that are not needed as described in Section 5.4.4 "Connecting the PV
Array (DC)" (page33) to seal the inverter.
5. Attach the AC plug.
6. If an external DC switch-disconnector is available, connect the external DC switch-disconnector.
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Comentarios a estos manuales

Sin comentarios