PV Powered 2500 Guía de instalación descargar pdf (Pagina 21)

SMA Solar Technology AG Electrical Connection

Installation Guide SB25_30-IEN092520 21

12. Screw the threaded sleeve onto the socket element.

13. Screw the pressure screw tightly onto the threaded sleeve.

☑ AC connection socket has been screwed together.

14. Close the socket element with the provided protective cap, if it is not immediately connected to

the Sunny Boy.

15. Insert the AC connection socket into the AC socket on the Sunny Boy. If necessary, remove the

protective cap beforehand.

16. Screw the AC connection socket's threaded ring

tightly onto the AC socket on the Sunny Boy. The

threaded ring serves to seal and relieve strain on

the AC connection socket.

☑ The AC cable is connected to the Sunny Boy.

Size used

PG13.5

The fastening case along with the sealing ring is pressed into the

threaded sleeve and can no longer be seen.

PG16

DANGER!

Danger to life due to high voltages in the Sunny Boy!

• Do not switch on the line circuit breaker until the Sunny Boy is securely closed and

the PV generator has been connected.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Sin comentarios

PV Powered 2500 Guía de instalación Pagina 21