PV Powered PVP4800 Información técnica descargar pdf (Pagina 26)

Grid-Tied Residential Inverters

Installation and Operation Manual

If the RED LED continues to illuminate when there is sufﬁcient sunlight for operation,

verify that no wiring connections are loose. If the wiring is tight, see 5. Maintenance and

Troubleshooting for additional information.

The vacuum ﬂuorescent display (VFD) indicates the inverter’s status and real-time

power output into the AC Grid. This display provides the following information:

Inverter model number.•

AC power produced in real-time (Watts).•

Lifetime energy produced (kWh).•

AC voltage in real time (VAC).•

PV voltage input in real-time (VDC).•

During start-up, a count down timer.•

Fault code message if a fault exists or recently occurred.•

Normal Display Cycle

The display will change screens every two seconds to show a different set of information

as shown in Figures 4-1 and 4-2.

If a fault occurs, the display also provides a corresponding fault code. Refer to

5. Maintenance and Troubleshooting for additional information.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

Sin comentarios

PV Powered PVP4800 Información técnica Pagina 26