PV Powered 5200 Especificaciones descargar pdf (Pagina 65)

64 DOCR 070366-B

7.4.3 AFCI self test

Description

The “AFCI Self Test” is a manual test function. When “enabled,”a self test of the arc detection

function will be carried out. If the internal circuit is OK, the inverter will show “AFCI Test Pass!” on

the display and shut down once the test passes. The inverter will start up again after the self test.

1. To display the arc self test, navigate to Main menu > Options > AFCI Self Test.

2. To enable the AFCI self test, change the mode from “disabled” to “enabled”. When the test

passes, the mode will change back to “disabled”. The inverter will be shut down.

3. The inverter will restart. The operation mode will show “normal operation” again.

7.4.4 Arc fault clear

Description

When an arc fault occurs, the inverter will shut down and the “Arc Fault Detected!” message will

be displayed. The inverter will remain off until the arc fault is cleared manually.

1. Check the operation mode of the inverter, navigate to Main menu > Production info >

Current data > Current overview. If an arc fault occurs “Arc Fault Detected!” will be displayed.

2. To clear the arc fault status, navigate to Main menu > Options > Clear Arc Fault

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 95 96

Sin comentarios

PV Powered 5200 Especificaciones Pagina 65