PV Powered 5200 Manual descargar pdf (Pagina 21)

Installation

This product is equipped with IP66 AC connector. You can connect inverter AC side by yourself. Please

see figure 15 for AC connector disassembling guide.

Figure 15 AC connector disassembling guide

Assembly steps of AC connector are as following：

Step1: Put the AC wire through the threaded sleeve and pressure screw.

Step2: Wire the AC side refer to following instructions.

• Screw the green-yellow wire to the ground terminator in the AC Connector

• Screw the N wire (blue wire) to the N(Neutral) terminator in the AC Connector.

• Screw the L wire (brown or black wire) to the L(Line) terminator in the AC Connector.

Step3: Confirm all the wires should be screwed down.

Threaded sleeve

Pressure screw

Socket element

Threaded sleeve

Connected wires

Pressure screw

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Sin comentarios

PV Powered 5200 Manual Pagina 21