PV Powered 3500 Manual del operador descargar pdf (Pagina 23)

6. Insert the cable into the slot.

Slot

SETTING

INV

SVC

ENTRY SELECT

7. Insert the smaller 4-pin connector of the cable to the connector in the display.

(listen for clicking sound that ensures it is locked in place).

Installing Display in a Socket Box

If you want to install the display on a wall, refer to

Installing Display onto a Wall

1. Insert the cable into the groove on the backside of the display.

Groove

2. Position the display and tighten by included screws. If installed in the dual outlets, use A opening

for screws, and if in the four outlets, use B. Do not expose the cable to abrasion risk.

Socket Box

When the procedure is completed, hook the top of the front cover on the hook of the display, and push the bottom side of the

cover until you hear a clicking sound.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 32 33

Sin comentarios

PV Powered 3500 Manual del operador Pagina 23